Radiodetection Sondes Overview
 |
S9 MiniSonde 33kHz | The S9 MiniSonde is a small 9mm (0.35”) diameter transmitter designed to be inserted into non-metallic pipes or ducts, and enables operators to trace the route of small diameter pipes or ducts and to precisely locate any blockages.
The flexibility of the S9 MiniSonde allows the Sonde to travel around bends or pass existing cables, while durable design and construction helps to protect the S9 MiniSonde from damage when travelling around bends or when encountering obstacles within the duct. The S9 MiniSonde is the ideal accessory for small diameter ducts, where flexibility and strength are required. Locatable to 13′ (4m) and measuring 0.35 x 5.4″ (9 x 138mm). Supplied as a kit that includes Sonde, 2 batteries and case. |
 |
S13 Sonde Kit 33kHz | S13: a ½” (13mm) diameter Sonde for narrow ducts and conduits.
The S13 Super Small Sonde is designed to be used for tracing the paths of non-metallic pipes, ducts, sewers and drains, and in the precise location of blockages and collapses. The S13 Sonde transmits a locate frequency at 33kHz, making it compatible with most Radiodetection Cable and Pipe locators, including the RD8100 Precision Locator range and the C.A.T4 Cable Avoidance Tool range. The S13 Sonde is supplied as a kit containing the S13 Sonde body, an M10 threaded male end cap, plain end cap with eyelet, 2 × batteries and case. An optional pack of 10 batteries is also available. |
 |
Sewer Sonde 33kHz | This is a self-contained, battery-operated sonde, measuring 2.51″ x 6.61″ (64mm x 168mm). It can be connected to a Flexrod for locating pipes and ducting etc. It transmits on 33kHz and can be normally located to a maximum depth of 26′ (8m). |
 |
Standard Sonde | Compact Sonde with a strong signal.
This is a self-contained battery operated sonde, measuring 1.53″ x 4.13″ (39mm x 105mm). It can be connected to a flexrod for locating pipes and ducting etc. Available in 3 frequencies with a locate depth of 16′ (5m). 512Hz, 8kHz and 33kHz. |
